The Completed Interlocking Ribs Counterpane!

The Specs

Finished Size: 60” x 77“

Which needed 8.5 lbs. of hand spun Falkland bulky weight singles and took more hours than I bothered to count!

My last post covered sewing up the center blanket units and knitting up the 4 cable and seed stitch borders.  Since then, I’ve sewn the borders on and edged the entire thing in Applied I-cord.

Here’s pics of how I decided to deal with the disparity between the seed stitch cable edges and the main body edges, which varies from knit and purl rib sections to BO knit stitch sections.

These photos were taken on my bed, atop a hand spun, indigo dyed, and handwoven blanket, and my “Golden Ferns Counterpane” design, which was in “101 Knitting-To-Go Projects”, 2001.

Now, I could have counted exactly how many stitches were along the main body sides and the lengths of cable edging, so to determine an exact ratio between the two, for sewing up, but I’m not that retentive!  

 Instead, I tried to divide the number of cable crossings into more or less even sections, and basted the 2 pieces together using a tapestry needle and a smooth (non-wool) yarn.  I found I needed to stretch the denser seed stitch edge when basting across the wide BO knit sections, but stretch the knit and purl rib sections, when basting along them.

This worked well enough.  As I pulled out the basting for each small section, I counted how many seed stitches there were and how many body stitches they would be sewn to, then adjusted the sewing-up ratio to suit.

The Applied I-cord was one of the easier parts of the entire process.  As I was using the same yarn for the I-cord as for the afghan, I didn’t need to add a yarn over on each row, which is done, when using a different color, so to avoid a color blip showing.

In all, the entire afghan was easy to work, so not only does it look modern, but once you work one repeat of the main afghan unit, you don’t need to refer to the book again.  Same goes for the cable borders, which are easy peasy.

As it’s heavy (8.5 lbs.), to block it, I laid an extra blanket on the queen bed, laid out the afghan and spritzed it with water, to dampen, but not soak it, then pulled here and there, to make the afghan square up as best it could, considering that the body patterns do ebb and flow.  

The last touch was the duplicate stitching on the 4 corner stockinette squares.  I used Lamb’s pride Worsted, held double, in Oatmeal, so that the stitching would be seen but not overwhelm.  Bride and groom’s initials on the upper 2 corners, a heart, and the year on the lower 2 corners.

I need to find a very large gift box.  Large shipping boxes we have, as I save the boxes that anything large comes in, knowing they will be useful one day.  

I *may* take a brief respite from knitting.  Then again, I may not!  More sewing for the house needs doing, and my floor loom has been sitting empty for well over a year, and I want to get this stash of t-shirt yarn woven up into small area rugs.  

Hand spinning is also an ongoing activity, at least until I send my flyer out to a woodworker sometime this summer to get it fitted with a higher speed whorl.  My wheel is a Country Craftsman, vintage, and no longer made.  It’s a wonderful wheel, but only has 10:1 and 13:1 ratios, which isn’t nearly fast enough to spin the singles for a 2-ply worsted to aran wt. yarn, without treading like the dickens for an hour, then a half hour to ply it.  It’s way too tiring!

More closeups!

Onward!

Dawn

The counterpane project continues!

My first post about the Counterpane Project is here, in case you haven't read it yet.  This first photo shows the main, central part of the pattern seamed up.  I love how the light catches on the vertical rib placement!

If you’re not familiar with this book, it’s filled with great patterns for traditional counterpane blankets.  I used the Alsacian Scallops stitch pattern in a scarf and mitten design many years ago, as the curviness of the scallops lend themselves to be used as an edging, which became the gauntlet on the mittens.

Now, when I say “patterns” I mean stitch patterns.  Each blanket design has several elements, usually a center motif, with several border motifs.  Each element has line-by-line instructions, but there’s no instructions included for how large, long, or wide to work the elements, nor how many are needed.

So, one needs to CO with the yarn of choice and appropriate size needles, and work a couple repeats of the main element, then do the math to figure out how many are needed, and approximately how much yarn will be needed.

Most of the patterns are worked in fine cottons on small needles, which I would never be inclined to use!  Instead, I spun about 6 or 7 lbs. of bulky weight Falkland wool singles, knit with US size 10 (6 mm) Addi Turbo circulars, working flat.  (I have yet to weigh all the parts to see the final weight.)

I knit 80 main motifs, knitting 4 together in each *square* grouping, then made 20 groups.  I laid them out 4 groups across and 5 groups down, which gives a 56” wide x 68” long large afghan.

This ribbed counterpane pattern has 2 borders – a cable and seed stitch border, then an interlocking ribs border.

I decided to leave off the last border, as the afghan would be large enough (and heavy enough) without it.  Instead, as the main ribbed pattern is more modern-looking than the other counterpane patterns in the book, I decided that the final edging would be Applied I-cord.

I also decided not to lay out the motif groups on their axis, as shown in the above photo, as that would have required the knitting of all those small triangles to create straight  top and side edges to the afghan.

The book mentions an option to leave a corner in plain stockinette, so to stitch on the year the afghan was made.  I decided to go one step further and have a plain corner on all 4 corners.  This way, one corner will have the year, one corner will have the bride’s initials, one will have the groom’s initials, and the last corner will have a heart.

To keep the stockinette on all 4 plain corners going in the same direction, I knit 2 lengths of just the cable and seed stitch patterns for the top and bottom edges.  The side edges begin and end with the stockinette sections.

I need to dig through stash for a tan or camel color, for the corner stitching, as I want it to be seen, but not stand out like a sore thumb against the white wool.

The cable borders are 3.5” wide, which will make the afghan 63” wide x 75”.  The I-cord may add 1/4 - 1/2” around.  It’s a generous size for snuggling up together on the sofa, or can be used either lengthwise or crosswise on a queen size bed.

One last blanket post will be forthcoming, showing how I’m attaching the cable border to the wavy body piece, then working the Applied I-cord, and showing the finished afghan.

Onward!
Dawn