Showing posts with label Nature Spun. Show all posts
Showing posts with label Nature Spun. Show all posts

Wednesday, April 2, 2025

Project Exposition - Knit Wool Pants


Many years ago, I knit EZ’s wool tights for myself, in Cascade Yarns Ecological wool yarn.  I’m sure I kept project notes, but, for the life of me, I cannot find them!  

I would prefer pants/slacks rather than tights, this time around, to, firstly, be more comfortable, and secondly, have a more spacious leg opening that will allow for the wearing of the compression sleeves I need on my legs.  I am now so used to the compression sleeves, I feel naked without them!  They also help to keep the legs warm in colder seasons.  I also found that knit wool tights tend to bag at the knees, looking sloppy, because of their close fit

So, the idea is to have the pants from the waist to about the knees have approximately 1” ease, but from the knees down, an amount of ease that will skirt past the calves and hang straight.

It’s this measurement which has been giving me trouble.  As a guide, I’ve measured the legs of the several fleece pants I wear, but after 2 attempts, I found the legs to be too large.  Then I remembered that these fleece pants are rather old (they do last forever, don’t they!) and hence are much larger than I now need.  I’ve long ago taken in the waist and hips on these pants, but I left the legs as they were, which is to say, loose.

I am now on my 3rd attempt, and thus far, I’m fine with the fit – not tight and not too loose.

I am not working these pants from the waist down, instead, from the ankles up.  Perhaps it’s because I’ve only ever worked clothing bottom up that I cannot wrap my head around wanting to work upside down.  

The tops of sweaters, or pants, are the most fiddly parts – the rest is easy – so I prefer to work all the easy parts first, whilst I cogitate about all the shaping needed for the upper part.  I don’t like to figure out the hard part first.  I just plot enough of the design to get me started knitting!

When working color patterns, I also don’t like the look of upside-down stitches!  To my eye, the bottom of all stitches needs to show as a “v”, not as a “^”.  This preference does cause issues when knitting a color-patterned sweater, but, that’s for another time.

Working from the ankles up also means the project is a good one for summer traveling or just knitting outdoors, at least until both legs are done, and ready to be joined.

Now, the yarn. Preferably, it needs to fill the following criteria:
1) wool or a wool/alpaca or wool/(soft) mohair blend for warmth
2) plied, for sturdiness
3) comfortably soft, but doesn’t need to be merino
4) DK, worsted or heavy worsted weight, so that the knitting won’t be interminable (as I do have a LOT of other things to do, including the knitting of new design samples)
5) completely made in the US
6) the cost of which won’t break the bank, best under $50
7) light in weight for its grist (thickness)

I don’t have enough skeins of a *pants” color in stash, which, for me, would be steel grey, charcoal grey, tan, denim, or navy blue.  

I’m not crazy about black – I find it gives too stark a contrast with the sweaters I would wear, and it’s rather a depressing color, or rather, lack of color!  Black always feels like the easy way out, when, in fact, black isn’t easy to pair with color, it tends to want to be paired with grey or white, but I prefer some color and pattern.

I’ve considered many yarns, but have settled on a few options:

Brown Sheep Lamb’s Pride Worsted.  Have used it *many* times before.  It *is* a single ply, but it’s spun well enough to be strong enough. The mohair helps in this regard, as well, although it could be a bit prickly on the legs.

Brown Sheep Nature Spun Worsted.  US made 3-ply with no mohair, so it would feel more comfortable than LPW, but I’d prefer something a bit softer.

Brown Sheep Prairie Spun DK.  US made, all wool, 3 ply, and gets good reviews, but 6 or 7 skeins would end up over budget.

Drops Alpaca BouclĂ©.  Not US made, but a boucle would surely make a light in weight pair of pants, and at a reasonable cost.

Sandnes Garn Peer Gynt.  Again, not US made, but this Norwegian yarn is sturdy, and the last thing I want to happen after spending all that time knitting pants is to have them pill or felt from frequent wearing.

Drops Alaska.  I’ve used it before and like the feel of it.  It fills many of the criteria, but it’s not US made.

Drops Nepal.  Also not US-made, but after having knit a sweater sample in it, I find I like it a lot.  It’s inexpensive and soft, so it’s a strong contender!

For the first pair of pants, I decided on 3 colors from 3 different worsted wt. yarns in my stash – 2.5 skeins Nature Spun Worsted in Buckskin (tan), 2.5 skeins Yarn Undyed’s worsted/aran wt. non-superwash extrafine merino, and 1 skein of the new Germantown in pink, which looks more coral pink.

As to the design – I will use stockinette – no texture or color patterns – so, the only details to flesh out will be:

1) Whether the shaping should run along the inner thighs, the outer thighs, or down the front and back, or a mix of these, used at different parts of the construction.  

I decided on the inner thighs - to keep the increases basically out of sight.

2) Whether to have a fold-over waistband with elastic, a waistband with ties, eyelets and ties, a button band with buttons, perhaps in the style of the old sailor’s pants, or ribbing with knit in elastic thread.  As I don’t like bulk at my waist, I won’t be knitting a fold-over waistband.

3) Whether the bum short-rowing should be worked in the bum area, just before the ribbing, or within the ribbing, as with EZ’s tights, or if I should just shape the front to be lower than the back.

The front and back of sweaters and pants are the same in that the back needs to be higher than the front, which we can achieve by either raising the back or lowering the front.

I think this is the hardest decision.  Unless one’s short rows are neat as a pin, and snug, they will show, if worked in the bum area.  If, however, I decide on the sailor styling, the back and front panels will be worked separately, so i may allow for another way of raising the back section, but the sailor-styling looks best with wide legs, which I am not doing, for the lack of enough yarn.  But, perhaps I can find a middle ground, we’ll see.

Designing is always filled with these quandaries, which need appropriate resolutions!

4) Whether I want hemmed cuffs or ribbed cuffs.  If hemmed, then perhaps knit in a thinner yarn, to reduce bulk.  The same could apply to the waistband, whether for elastic or ties.  To keep this simple, I decided on k2, p1 ribbing, which I’ve been preferring over other ribbings for quite some time.

When I knit EZ’s tights, I skipped the under foot tab, and just began with the few rounds of garter stitch.  I otherwise followed her instructions, including having the ribbed waist.  I really wasn’t crazy about the ribbed waist and how the bum and waist fit, but then, my bum was more bodacious back then.  Menopause tends to shift weight around on a woman’s body, and so, it has with me, removing about half my bum.  So, it may turn out that I won’t need much shaping.

As I’m short waisted, I also like all my bottoms to sit mid-rise, below my belly button.  To me, there’s little worse than fabric bunching up at the waist, when I sit!  I also like the waistband to sit in place firmly – no wiggling waistbands!  It’s the little things that annoy us.  But, isn’t that one reason we knit?  To get exactly what we want or need.

Despite having ripped out 2 legs while figuring out this design, the plain knitting-in-the-round is just what I need right now, whilst I deal with hubby being in the hospital twice and in 3 rehab/nursing homes over the past 2 months.  

Mentally, I’ve been in limbo, finding it difficult to focus on my work – woe to the 4 related designs which are only partly knit and barely written up! 

I keep expecting that he should be able to come home soon, when I will then be quite busy all day taking care of him, and the house and cooking.  The reality is that I haven’t a clue how much longer he will need to be in rehab, so I do need to snap out of this mental fog and get done what I can, while I can.  

At least as of the other day, he has his new cell phone connected to his account and his previous phone #, which he naturally didn’t want to give up.  Hopefully, this phone won’t go missing, like his old phone – it’s why when I was in the hospital, I didn’t even bring my contact lenses, knowing how things go missing in hospitals.

I’m just at the point of beginning to increase gently for the thighs.  I’ll post again when both legs have been joined and I’ve decided on the styling for the top of the pants!

Onward, Dawn

Monday, March 13, 2023

Everyday Cable Pullover


I’ve begun several sweaters for myself, as I haven’t knit myself a sweater in many years, so it’s past time!

I usually use heavy worsted (aran) or bulky wt. yarns, for a quicker/thicker garment, but for this cable sweater I thought I’d try a dk/worsted wt. yarn, in this case, Brown Sheep Nature Spun Worsted.  At 70 yds to the oz., this yarn is more a DK wt. than a worsted wt.  

It’s such a basic drop-shoulder, wide-ish crew neck design, I thought I’d post it here for free in the one size I knit.  It shouldn’t be too difficult to extrapolate further sizes - only simple math and percentages are needed.  

C = circumference
armhole depth = 25% of C
back neck = 20-30% of C, depending on whether one wants a regular crew neck or a wide one.  I used 25%.
front neck = 15-20% of C, for the same reason as back neck.  I used 17%.

I used size 8 ndls, when I would normally use a size 6 or 7 with a DK wt. yarn.  The resultant fabric is stretchy, and fits my 36” chest very comfortably, and isn’t snug at all.

There are a few sets of photos.  I only had 5 skeins to begin with, which was just enough to knit the sweater with short cuffs and neck edging.

I decided I would prefer longer cuffs, for folding up, and almost a mock turtleneck, so I found one more skein, in the same dyelot, on Ravelry.  I unzipped the bind offs and lengthened the cuff and neck edging ribs.  


But, it turned out that I didn’t like the taller neck ribbing tickling my chin!, so I unzipped the BO again, ripped out the extra rnds, then worked 1 rnd, while dec 9 sts evenly around, then BO, so it would lie flat.

In retrospect, I should have worked the neck opening as a normal crew neck, instead of a wide-ish one, using 20% of C for the back neck, instead of the 25% I used, and 15% for the front neck, instead of the 17% I used, as I have narrow shoulders.

Generally, I prefer v-necks.  If you want to work a v-neck on this sweater, I would make sure the sts are arranged so that a 3-st knit panel is center front, so that when the v-neck shaping begins, there would be 1 knit st for the left and right front edges (to facilitate picking up edging sts) and 1 center front knit st to be put on hold, until the v-neck edging is worked.

Size: S-M

Finished Dimensions
chest: 34” (easily stretches to 38”)
length: 20.5”
sleeve length, with cuff flat: 20”
armhole depth: 8.5”
cuff circ.: 6”
cuff depth: 3”
neck width (with rib): 7.25”
neck depth (with rib): 2.5”
neck rib depth: 1.25”

Yarn
Brown Sheep Nature Spun Worsted, approx. 245 yds/100 gr, 5-6 skeins Victorian Pink

The longer cuffs only needed 11 gr. from the 6th skein.

Needles
24-32” US size 7 (4.5 mm) and 8 (5 mm) circular ndls
16” US size 7 and size 8 circular ndls
Size 7 double pointed ndls
tapestry ndl
stitch marker
cable ndl (optional)

Gauge
18 sts and 26 rows = 4” in St st, and 2 reps of cable patt (18 sts) = 3.5”,with US size 8 (5 mm) ndls or size to give gauge.

Substitute Yarn Weight: DK to worsted

Stitch Pattern (9-st rep)
Rnd 1: (K3, p1, k4, p1) around.
Rnd 2: (K3, p1, 2/2 RC, p1) around. Rnds 3-6: Rep rnd 1.
Rep 6 rnds for patt.

Abbreviations
ssk = slip 2 sts, separately, knit-wise, then knit them together from this position, OR slip the first st as if to purl, then slip the 2nd st as if to knit, then knit them together from this position.

p2tog = purl 2 sts together. This dec, when worked on WS rows, exactly mirrors a ssk, worked on RS rows.

p2togb = purl 2 sts together through their back loops, by inserting the right-hand ndl into the back of the 2nd st, then into the back of the 1st st on the left-hand ndl, then purl them together from this position.

This dec is a little fiddly and is often worked on WS rows, as it exactly mirrors a k2tog, worked on the RS.


2/2RC = 2 over 2 right cable (sometimes called a cross).  Put 2 sts onto cable ndl and hold in back, k2, then knit 2 sts from cable ndl.

OR

Pinch off 4 sts, hold 2 sts in front, while replacing rem 2 sts onto the LH ndl, then return the 2 held sts to the LH ndl and knit them in their new positions.

I never use a cable ndl when crossing small cables, like 2/2RC or 2/2LC, but use whichever method works for you!

Notes
The sweater is knit in the rnd, from the lower edge to the underarms, then the sts are divided in half, and the back and fronts worked flat, separately.  

After seaming the shoulders, the sleeve sts are picked up around the armhole and worked in the rnd.  The neck ribbing is picked up and worked in the rnd.

The lengths of the lower rib, as well as cuff and neck ribs are totally up to you.   I prefer a shorter lower rib, but longer cuff ribs.

Lower Ribbing
With longer size 7 ndls, long tail CO 184 sts.

Work 11 rnds k1, p1 rib = approx. 1.75”, or work to desired rib depth.

Inc Rnd: With longer size 8 ndls (k3, p1, k1, m1, k2, p1) around = 207 sts.

Rnd 2 (Setup Rnd): (K3, p1, k4, p1) around.
Rnd 3: (K3, p1, 2/2 RC, p1) around.
Rnds 4-8: (K3, p1, k4, p1) around.
Rnd 9: (K3, p1, 2/2 RC, p1) around.
Rep last 6 rnds (rnds 4-9) 9x more = approx. 11.5” from CO edge.

Back
On next rnd, patt 103 sts.  Place rem 104 sts onto waste yarn or a spare ndl.
Work back and forth for 56 more rows = approx. 8.5” from underarm, end after finishing a WS row.  (There are 9 cable rows worked plus 3 *even* rnds.)

BO while dec 1 st at center of each cable crossing (to keep edge from flaring).  Use k2tog or ssk on the center 2 cable sts.  I prefer how the ssk dec looks, but the choice is yours.

Front
Place the 104 held sts onto the working ndl, and with RS facing, continue the patt across.  

Work back and forth for 38 more rows = approx. 5.25” from underarm, end after finishing a WS row.  (There are 6 cable rows worked plus 3 *even* rnds.)

Right Front Neck Shaping
Row 1 (RS): On next RS row, patt 34 left front sts, BO next 36 center front sts.  At this point, 34 right front sts rem.

The st rem on the RH ndl, from the last BO st, stays in St st, then ssk, patt rem of row = 33 sts rem.

The left front sts can rem on the longer working ndl or place them onto a holder, waste yarn, or spare ndl, if you find them to be in the way.

Row 2 (WS): Patt to last 3 sts, p2togb, p1 = 32 sts rem.
Row 3 (RS): K1, ssk, patt rem of row = 31 sts rem.
Row 4 (WS): Patt across.
Row 5 (RS): K1, ssk, patt rem of row = 30 sts rem.
Rows 6-13: Rep last 2 rows = 26 sts rem.
Patt even for 5 more rows.
BO while dec 1 st at center of each cable.

Left Front Neck Shaping
Row 2 (WS): With WS facing, join yarn, p1, p2tog, patt across = 33 sts rem..
Row 3 (RS): Patt to last 3 sts, k2tog, k1 = 32 sts rem.
Row 4 (WS): P1, p2tog, patt across = 31 sts rem.
Row 5 (RS): K1, ssk, patt rem of row = 30 sts rem.
Row 6 (WS): Patt across.
Rows 7-14: Rep last 2 rows = 26 sts rem.

Patt even for 4 more rows.
BO while dec 1 st at center of each cable.
Seam shoulders together.

Sleeves
With shorter size 8 ndls, beg at center underarm, pick up and knit 112 sts around armhole, place marker.  The first st of every rnd remains in knit as the center underarm st.

Setup Rnd: K4 (p1, k4, p1, k3) around.
Rnd 2: K2, ssk (p1, 2/2RC, p1, k3) around to last 9 sts, p1, 2/2RC, p1, k1, k2tog = 110 sts.
Rnds 3-5: K3 (p1, k4, p1, k3) around to last 8 sts, p1, k4, p1, k2.
Rnd 6: K1, ssk (p1, k4, p1, k3) around to last 8 sts, p1, k4, p1, k2tog = 108 sts.
Rnd 7: K2 (p1, k4, p1, k3) around to last 7 sts, p1, k4, p1, k1.
Rnd 8: K2 (p1, 2/2RC, p1, k3) around to last 7 sts, p1, 2/2RC, p1, k1.

Continue around, dec 2 sts at underarm on every 4th rnd and crossing the cables on every 6th rnd, until 56 sts rem and sleeve is 17” long, changing to size 8 dpns, when the # of sts dictate.  

18 sts will be decreased before working the 3” long ribbing, so if you desire the body of the sleeve to be longer, you can continue to work around in established cable and dec pattern.

Cuff Setup Rnd:
With size 7 dpns, p1, k2tog, p2tog (k1, p2tog, k1, p1, k2tog, p2tog) 5x, end k1, p2tog, k1, p1, k2tog, then p2tog using last st and first st of rnd = 38 sts rem.
Work p1, k1 rib around for either 11 rnds = approx. 1.75, or 20 rnds = approx. 3”.  BO loosely  in rib.

Neck Rib
With 16” size 7 ndls, beg at right shoulder, pick up and knit 1 st at shoulder, 41 sts across back neck, 1 st at left shoulder, 16 sts along left neck edge, 33 sts across front neck, 16 sts along right neck edge = 108 sts.

Work k1, p1 rib for 7 rnds = 1”, or for desired length. On next rnd, dec 9 sts evenly around, as follows: *(k1, p1) 5x, k2tog; rep from *8x more = 99 sts rem.  

BO in rib.



Happy Knitting!
Dawn


Sunday, November 13, 2022

New Pattern, New Knitting, and New Movie Discoveries

 I've released a new knitting pattern – Midnight Snowfall Hat & Mittens

After I designed the ‘Midnight Snowfall Tea Cozy, I just had to use the color pattern as the main pattern for a set of hats and mittens.

To make the mittens more interesting to knit and wear, I designed them in the Norwegian style, with a smaller palm pattern, striped thumb gussets and thumbs, demarcating side stripes, and angled shaping at the tips.

Instead of the usual Norwegian-style wide patterned cuff, which wears outside one’s sweater or jacket, I used ribbing for the cuffs, as I prefer mitten cuffs to reside inside my sweater or coat. I left the hats pompom-less, but there’s no reason you can’t add them!

The pattern offers a child’s medium and a woman’s medium hat and mittens, knit in widely available Lamb’s Pride Worsted and Lanaloft Worsted. Full-size mitten charts make it easier to follow.  Knit a set for someone you love this winter!

Sized to fit a medium child / medium woman.
The pattern is $6 and is available on Ravelry, Etsy, and Lovecrafts.

More Knitting in the Works

LOL, see a theme here!?

Yup, pinks and lots of them – Victorian Pink Nature Spun Worsted, and Rosado Rose and Orchard Blush Lamb's Pride Worsted.  All destined to be cable sweaters.  My wardrobe is seriously lacking in pink, which I want to pair with charcoal grey pants and the pink plaid Grasshoppers Janey sneakers I bought years ago

I have 3 sweaters in progress (and 2 more in the planning stages) – a stranded Norwegian Fans cardigan, a classic cable v-neck pullover in Victorian Pink Nature Spun Worsted, and a crew neck cardigan version for my granddaughter Evelyn in Orchard Blush Lamb's Pride Worsted, which she can wear with one of the hat/mitten sets I knit for her that uses that color.

I always knit sweaters from the bottom up, as it gives me plenty of time, while I'm knitting, to cogitate about details - whether I want a waist detail or something to accentuate the neckline.  I rarely pre-plan a design.  I design by doing.  It's the same for me when weaving, cooking, or baking.

When it comes to clothing, I prefer florals and classics.  Almost every summer dress I have is a floral!  When it comes to sweaters, I definitely prefer cables and Fair Isles (or Norwegian and Swedish patterns).

No photos yet, though, as I'm just at the beginning of these designs.

New Movie Discoveries

I'm always scanning Prime Video, Pluto, Tubi, and sometimes Crackle, trying to find *good* movies to watch.  I prefer movies and a good series over any other type of television.  While knitting, I find a series is ideal to put on to listen to, as movies end too soon, then I gotta interrupt my work to try to find another one I want to watch.

It's getting harder and harder, though, as the years go by to find good stories, acting, and directing.  All three are needed to make a good movie.  So, I tend to re-watch things I've seen many times before, funny movies like 'Nadine' from 1987 with Jeff Bridges and Kim Basinger, or real classics like Fred & Ginger, or the Margaret Rutherford Miss Marple movies from the early '60's.

This week, though, i discovered 2 good movies – 'Flawless', with Michael Caine and Demi Moore, and 'The Courier', with Benedict Cumberbatch and Rachel Brosnahan (from Mrs. Maisel, a series I LOVE, as a fellow fast-talking and moving New Yorker!).  I've liked Benedict's work since the Sherlock series.  And Sir Michael Caine never seems to do poor work and I love to listen to his Cockney accent!

As for a good series I never tire of (besides Poirot) are all the John Nettles episodes of 'Midsomar Murders'.  I've been knitting a lot, so I'm on my 4th trip through his 13 seasons! 

May your needles fly like the wind, while enjoying something good to watch!
Dawn


Monday, August 15, 2022

Christmas in August

I always need a Plan.  Not a Deadline, mind you, just a plan.  At this point in life, ‘deadline’ is a dirty word. Who needs the stress?

I do, however, need my mind and my environment to be organized, or I feel overwhelmed and flounder in indecision and a lack of motivation.  It’s logical, as being motivated intimates a state of action, or near action, but if one doesn’t know what to take action upon, the action is stymied.  Energy flow is blocked.  It’s bad feng shui, for both the mind and the body!

So, as I’m back to feeling well enough to cook, clean, and climb stairs to do laundry, my natural inclination is to get back to work - knitting patterns, spinning, and weaving, as well as planning some home projects – sewing, organizing, getting in a few much needed things, and getting rid of the old tat and broken electronics and appliances.  

There’s a lot that needs doing!  And although I am feeling well enough, though still on the mend, I’ve learned (finally) not to over do.  Being organized and having a Plan of Action is crucial.  Hence, Christmas in August.  I’ve begun the knitting for the grandkids’ Christmas gifts now, instead of putting it off until November.

I don’t really have time right now to design things from scratch, as heaven knows, there’s a pile of half-finished designs and patterns sitting here waiting for me the past 2 years.  

So, I pulled out the kids’ pattern books that I have hoping to, just once, be able to follow someone else’s pattern, as EZ used to say, as a Blind Follower.  At least, that was the plan.  And we all know how the Universe laughs at plans!

I have 2 Minnowknits books, this one and this one, also Takle and Kolstad’s “Small Sweaters”, 3 Debbie Bliss books, and VK’s Kids issue from 2001. Not a lot of books, but enough to inspire.

I also pulled out my binder of sizing info – data I had collected over many years of designing.  Looking through all this data, however, made my head begin to swim.  It all wasn’t organized enough to be a quick reference.  

So, a Detour.  Spent an entire day (and will need to continue it another day) organizing all this info into charts – body measurement info, but also ease and sizing info, which is affected by yarn weight and stitch patterns.  This short detour is a necessary refreshing of the memory, as I’ve not been knitting for children often, just once a year.

But of course, all the patterns I like will need some (or a lot of!) reconfiguring. It’s always the way – I’ll like a particular stitch pattern or color chart being used, but don’t have the pattern’s given weight and style of yarn, or the pattern isn’t in the size I need.  I’m sure a lot of knitters are faced with this same scenario.  Most of the time, it is all easily enough remedied, so long as one doesn’t mind some math.

I’ve begun with this hat, for my granddaughter, who turns 3 in January. The hat was originally designed in a DK wt. yarn, and I’m using Lamb’s Pride Worsted which leans toward a heavy worsted weight, so I had to reconfigure the stitch counts and the stitch patterns, as well as the ear flap shaping.  The ear flaps took the most time and I’m still not sure about them.


The edges of the earflaps, front and back edges are also left plain in the pattern, which I don’t like, so I’ll be adding an edging.  And a hat needs matching mittens, so I’ll need to design them.

I’m still not sure I want to continue knitting this pattern in the yarn I have, so I ordered 16” and 24” Basix circulars in sizes 4, 5 and 6, in case I decide to rework it (or start something else) in a DK wt. yarn, likely Nature Spun Worsted, which, despite the name, really wants to be knit at a DK wt. gauge. 

I have plenty of circulars, but in larger sizes, and, as is usual, the price of my beloved Addi Turbos have risen quite a bit since I bought my circulars 25 ish years ago!  I don’t mind investing in tools, as I LOVE tools, but am not eager to spend $90 for 5 sets of circulars!

So, while the hat is on hold, I decided to knit this aran sweater for grandson, who turns 5 in December.  

In both of Jil Eaton’s Minnowknits books, there is the same cream-colored aran sweater, in a chunky gauge. I have more than enough Lanaloft Worsted in Manor Grey and Ash, and I decided on the grey. Again, despite the name, the LLW really wants to be knit at a heavy worsted wt, gauge.

Naturally, my gauge is a smidge snugger than the pattern’s, so more reconfiguring was needed.  But that was just the beginning of the needed adjustments. As I knit sweaters in the round, never pieced like in this pattern, this too had to be addressed.  The next thing to change was the direction of the cables on the left front and the left back, so that the cables face each other (mirror image), instead of all crossing in the same direction. I really like things to be balanced, which shows an attention to detail when creating a pattern, that enough thought and planning has gone into the design.

The last change I’m making is how often the 2/2 and 3/3 cables are crossed. The pattern has them both crossed every 8th row, which is rather loose for my taste, so I’m crossing the 2/2 cables on every 4th rnd and the 3/3 cables on every 6th rnd.

I could have just designed this sweater from scratch, for all the changes I’m needing to make, but it will be all the better for it!  

Grandson is said to be fussy about what he will wear, so I knit this aran pullover more in hope, than expectation, that he will like it enough to wear it!

Onward,
Dawn